Tuesday, August 21, 2012

Curving Text in Embird using Embroidery Alphabets

I get the question almost daily, "How do you create the name curved around an applique shape?" Curving text around objects is really easy using Embird. In this post I'll show you how I do it with an embroidery font on my computer. I will be doing a separate post on curving text using Embird Font Engine.

This may not be the ONLY way to do it, it is just the way that I've used over the years to get my text curved around my desired shape. Also, Embird is not the only software that will do this, it just happens to be the one that I use. BTW, I am not endorsing or associated with Embird in any way :)


Start in Embird Editor screen and open the applique design that you would like to add text to.

Next, you will merge the text letters. Click the "Merge" icon or click "File" "Merge" which brings up the Merge Files dialog box. Navigate to the folder which contains the alphabet that you are bringing in. Click on the first letter of the text you want to bring in. Now, holding down the Ctrl key, click each letter that you want to add until you have all the desired letters highlighted. It should look like the pic below.

Click OK. Now your letters are placed into your design, all 'dumped' into the center of the design on top of each other. Now you will separate and align them onto a straight line by clicking and dragging each one separately into a straight line. You can do this anywhere on the screen for now as we will move the text later when we get it curved. (The alphabet shown is Applique Market "Madeline" font.) Now your design should look something like this:

Now, group just these letters by selecting them in the boxes on the far right of your screen. Click the first letter, then while holding down the shift key, click the last letter, and they should all be selected and you should see a box around the entire word.

Now right-click on the word box. This will bring up a long pop-up menu. Scroll down to Set (about 1/3 of the way down). While you are hovered over "Set", another pop up appears. Scroll over and click "Set Envelope". This will bring your letters into a new screen. If you are not already, click the "Layout" tab at the top left of the screen. Your screen should look like this:

This is where you will set the shape for your text to curve around. At the bottom left you will see "Baseline", the default is "Line". Next to "Line" is a small down arrow. If you click here you will see the Baseline options, Circle, Wave, etc. These different baselines can be used for different angles. For the football in this example we will click "Circle".

Now your text is curved around a circle like this:

Now you will tweak the circle to be more of the shape of a football. Under the baseline you'll see "Width", "Height" and a "Keep Ratio" box. Uncheck the "Keep Ratio" box and decrease the "Height" number until your circle is more of an oval. Now using the tiny squares under each letter, you can move each letter closer together or further apart to get the look you want. Use the first square on the line to move the whole word together around the oval shape.

In this area you can use the other boxes to raise a letter up or down or tilt it, etc. There are tons of ways here to tweak your word, also by changing the 'Envelope' setting, this is something you should play around with a you'll find lots of ways to manipulate your words! Also, we won't need it for this example, but you can move the text to the inside of the circle or oval by checking the box "Place on the other side". That's a helpful tool at times also.

For this example, I moved the word around to the right of the oval and moved each letter a little closer together for a better look since this is a script I wanted them touching. After you tweak your letters they should look something like this:

Now click OK. Your word is brought back into your design, 'dumped' into the center of the design. Now be careful here as your letters are still separate, but are grouped together into a box. If you click on the box you can move them around as a whole, if you at any point click outside the box, they will be ungrouped and you'll have to group them again.

Now this part is where you'll have to make a few tweaks if necessary depending on several factors...your design size, text size, text angle, etc. This is what my example looks like at this point:

I'm going to click on the box around the word and move it over to the football. After I get it over to the football, I'm going to click the "Rotate Mode" icon (left side toward the top) and rotate the entire word box to a better angle on my football. After you finish rotating be sure to reclick the "Select Mode" icon (left top) so that you are off of Rotate Mode. All of this must be done while the letters are still selected in a box. After these two tweaks it looks like this:

Alright I think we have something here! Now I am happy with my curved word. So, I am going to join my word together by pressing Ctrl + I (shortcut for join). Now I can add more designs or words or just save my file and begin stitching.

If at this point you are NOT happy with your word, you can rotate each letter individually if necessary or you can go back to Set Envelope and play around with the settings in there. Once you do this a few times you'll get comfortable with the sizes and angles and you'll find it's quick and easy. Much quicker than explaining in this post!

I hope you'll give this a try to add some different looks to your appliques!

Applique Everyday!

Monday, July 23, 2012

My Studio Redo

After years of waiting we recently ripped up the carpet in our bedroom and my studio and put down wood flooring to match the rest of the house. That meant everything had to come out of the studio which was quite a task! In the process I decided I would PURGE and only keep what I really needed and was planning to use. Once those new wood floors went in I decided that an overhaul of the room was long overdue, after all I spend many, many hours in here either working at the computer or designing and stitching appliques.

So, first I will share my BEFORE photo with you and it is, well, a little scary! I did a decent job of keeping it clean and things put away, but it was very cluttered. I had lots of shelves and storage, but none of it was pretty! I was using our old kitchen table for a desk which meant no drawers or keyboard tray. And all my tables were white plastic 'church' tables. And lots and lots of plastic storage bins!!
Okay are you ready? Here's before...

Not awful, but nothing exciting. I hope this is not the pic that ends up on Pinterest!

Now, on to the good stuff! Here is my after...

Quite a change I know! My studio is actually our 4th bedroom and was once our laundry room before our house was remodeled several years ago. It is not a regular size bedroom, much smaller actually, just 9 feet wide by 11 feet long, with a closet.

When I decided to revamp I had 3 goals:

1...no more white plastic tables or plastic storage bins!

2...a vintage dresser for a work table and

3...a display wall for my samples that I could change. 


I had spotted this system on a trip to Ikea and thought it would be perfect.

The bins hold supplies for the sewing machine and a few other things. The rods, bins and hooks for the bins are all from Ikea. The rod clips that are holding the samples are curtain clips, these are from Wal Mart. They matched the Ikea things perfectly.

This little chest is a local antique mall find. It is great for storage! I lined the drawers with dollar store wrapping paper.


Now for my favorite part of the room...


Believe it or not this dresser was a freebie given to me by a friend who wanted to get it out of her garage! Now it did not look like this when I got it...Here is the before:

The bottom two drawers were missing :( My friend gave me the idea to use baskets in place of the drawers. She did have one of the drawer fronts which had two handles on it so I had my husband cut two strips out where the handles were and we mounted them in the middle for a separation for the baskets. Then I painted it all white and distressed and waxed it (Annie Sloan chalk paint). The challenge was finding just the right baskets and I tried many before I decided on these which came from Michael's.

The two shelves are from www.target.com. They arrived in boxes and my husband put them together. Finding the right baskets for these was challenging also. These I finally found at Homegoods and the two bottom on each shelf hold the fabric that I use most, separated into 'big dots', 'little dots', 'checks' and 'other'. The rest of my fabric is stored in the closet in the room.

Don't you just love these chalkboard tags? I got these from BradensGrace on Etsy. I used a chalk marker from Hobby Lobby to write on them, it writes darker than actual chalk and still comes off with water. I have to get some more of them!

The vintage chandelier was a $20 find from a local antique mall. It had been half spray-painted white and had no crystals, but luckily I had a stash of crystals from my days as an antique dealer (before I was a digitizer). I covered all the light sockets with little plastic bags and hung it from a tree in my backyard and spray painted it with flat white spray paint (the cheap kind from Wal Mart!). I purchased a swag light kit ($18 from Home Depot) and it had the chain, wire and hooks all included. I made the cord cover from cotton fabric. Since I have a large flourescent light in the room I really didn't need any extra lighting so I put 15 watt bulbs in just for 'atmosphere' and they are perfect! This was something I had always wanted to do in a room in my house so why not my studio?!

I made the valance from regular burlap (from Joann) and lined it with tan cotton. Made the ruffle by zig
zagging over jute string and then pulling it to ruffle and fraying the ends a bit. Took me all of about an hour!


The vintage white frame is another find that I've had stashed in my shed a while. Again, lots of flat white spray paint and a little distressing. The thread holders are from Joann and were also spray painted white. Now, this is not all the thread that I have, but it's the colors I use most. I have the rest of my thread stored in a bin close by when I need it.

I found this white desk at a local salvage furniture store that has brand name furniture that is 'less than perfect'. I thought it was just right for the room. It's so nice to finally have a keyboard drawer and a few drawers for supplies. Over top we added a couple of floating shelves (Home Depot) and that gave the desk some height and a  place to display photos and have a little storage.

And finally, my closet got a bit of a redo also, this is where I keep the rest of my fabric and the few blanks that I still keep in stock. I could have done more here but by the time I got to the closet I was getting burned out!

Here's a close up of some of my favorite details of the room.

I used a vintage glass carrier filled with dollar votive holders to hold the things I use often on my work table.

These wire baskets look vintage but are new from Big Lots...

The burlap curtain as a backdrop for the dainty vintage chandelier...

This thread catcher is from nstitches4u on Etsy. I love it! It holds pins and has a bag for threads and a pocket for your scissors.

And I love having this pic of me and the other digitizers from the Everything Applique Conference.

Thanks to my hubby for all the work he did to help me with the room...even when he thought I was crazy for hanging a chandelier over my work table he went along with it :)

I hope that my studio will inspire you to make your sewing space something that you love to work in and a place where you can be your most creative!


Graphic Design by Polka Dot Dandy